Custom Remote System
Our most advanced remote system offers the Garden Designer complete freedom in the controlling of both mains and low voltage products within one package. With up to 16 independent control circuits the user can determine the split between mains and low voltage supplies, either being controlled via the remote hand set, continuous supply or switched via a timer circuit. The complete system has a capacity of powering up to 120 lights and up to 30 amps of mains switching. For extended life and easy maintenance a plug in relay controls each switching circuit. It may be necessary to use a qualified electrician to install the enclosure and mains circuits.
- Model No. E8 8 channel system for up to 120 lights.
- Model No. ET8 8 channel system, with timer for up to 120 lights.
- Model No. E16 16 channel system for up to 120 lights.
- Model No. ET16 16 channel system with timer for up to 120 lights.
- Transformer Specification
- Encapsulated in plastic housing
- Screw terminals on input and output
- Strain relief for connecting leads
- Thermal overload protection
- Integrated primary fuse protection
- 100% electrical and 5KV flash tested
- Easy installation, mounting holes provided
- Approvals include EN61 – 558, VDE 0570, UL 506
- Timer Specification
- Quartz controlled movement, daily and weekly time switch
- Holiday switching, manual override and permanent on / off facility
- Block programming
- Automatic summertime correction when date is entered
- 6 year battery backup
|
 |
| Remote Control Specification
Up to 200 metres direct line of site
Supplied with hand held transmitter
High security protocol
No radio licence required
European wide 433 MHz operation
LED indication of transmission in progress
|
Enclosures Specification
All enclosures rated to IP67
All cable entry glands rated to IP67
Mains input cables (where fitted) are terminated on RCD 3 pin safety plugs
Distribution terminal blocks provided for each low voltage circuit
|